Terrace

-

Thermal facade with self-extinguishing and waterproof polystyrene, high impact resistance. The elastic silicone plaster prevents the appearance of cracks and waterproofs the terrace.

λ=0.080 (W/mK)

-

Before the applied insulation, 50 mm concrete with fiberglass mesh is placed.

λ=0.033 (W/mK)

-

Certified material (EN13163 certification) with high thermal insulation capacity. It is self-extinguishing and waterproof. It also functions as a vapor barrier. In addition, it has soundproofing properties.

λ=0.13(W/mK)

-

OSB Category 3 with enormous mechanical properties. This material statically strengthens the masonry and enables us to fix any weight to any point on the wall, without the need for a special dowel.

λ=0.035(W/mK)

-

Natural mineral wool offers excellent thermal insulation, sound insulation and fire resistance (class A1-non-combustible materials). Knauf Insulation mineral wools with ECOSE Technology benefit from a formaldehyde-free binder, which is produced from rapidly renewable organic materials and does not include petroleum-based chemicals.

-

Timber:

Drying room: which means that it has a humidity of 15-16% (ideal for residential construction) and has NO chemical loads.
Ecological: which means that the wood does not contain chemical loads and that the Swedish Wood Industry's policy contributes to the absorption of carbon dioxide.
Class C24: which means that it has very high mechanical strength.

-

The plasterboard false ceiling is not installed directly on the beams but is attached to galvanized Knauf formwork.

-

It is installed to remove water and prevent its accumulation. The installation method eliminates leaks.

-

It is a cast elastic polyurethane-based membrane. It polymerizes with atmospheric moisture and forms a waterproofing membrane over the entire surface of the terrace. It provides excellent protection from weather conditions and solar radiation, while protecting the other materials of the terrace from wear and tear.

-

Synthetic waterproofing material (Purenite) - Synthetic water-repellent material for the flat stagnant surfaces at the top of the parapets. Prevents moisture absorption.

-

2nd bitumen membrane (with tiles): Provides waterproofing to the roof. This is the second layer of two in total, which are placed in a staggered arrangement with each other.

-

1st bitumen sheet: Provides waterproofing to the roof. This is the first layer of two in total, which are placed in a crisscross pattern between each other.

The bitumen varnish provides waterproofing to the roof.

λ=0.3 W/(m*K)

-

It provides insulation to the structure and protects against moisture, without allowing the appearance of water vapor that could gradually cause damage to the structure.

λ=0.21(W/mK)

-

Certified gypsum board (EN520:2004+A1:2009 certification) from the Knauf company, 12.5 mm thick, which meets the German standard DIN 18180. They have natural gypsum certifications, as well as biological control.