Masonry timber, which is:

• FSC: certified timber
• Swedish: which means it is very compact
• Pine: which means greater resistance to moisture.
• Dryer: which means that the wood is cured for weeks and disinfected naturally and not chemically (like green wood), while the humidity reaches the ideal, for residential construction, level of 15-16%.
• Ecological: which means that the wood does not contain chemical loads and that the policy of the Swedish Wood Industry contributes to the absorption of carbon dioxide.
• Planned: which means that it has perfectly flat surfaces, which, in combination with the factory connections, achieve absolute assembly and zero joints in all the construction parts of the house.
• Class C24: which means that it has very high mechanical strengths showing up to 80% a higher load-bearing capacity than ordinary construction timber.

The certification FSC (Forest Stewardship Council) refers to an international certification system that confirms that the timber comes from managed forests that adhere to high environmental, social and economic standards. The certification FSC ensures that for every wood that is cut down, they are planted 3 new ones in his place.

The KOFINAS company makes special orders for the masonry base from Sweden.  

The waterproofing of the base of the wall is carried out using a impregnated beam, type NP5. The wood maintenance class A and AB (Class A and Class B) of the wood we supply implies the treatment carried out in accordance with the penetration class NP5 which is configured according to the SS-EN 351-1 standard. In this way, the base of the masonry is protected from damage that could be caused by possible moisture in the base from the concrete, improving the durability of the house over time.

In the masonry is placed:

• OSB: Category 3-APA from LP

– Factory LP: Of American origin with exclusive imports to Greece for KOFINAS SA.

In the masonry and in the construction of the roof as it is placed on the roofs OSB of the factory LP, of American origin with exclusive imports, class 3- APA with tremendous mechanical properties. This material statically reinforces the masonry and gives the possibility to fix any weight at any point of the wall, without special addition.

The KOFINAS company carries out special orders for OSB with special dimensions, so that it covers the entire vertical side of the wall without joints, for the additional air-waterproofing, as proved in the experiments of the polytechnic, the masonry is completely shielded with each sheet OSB(without adding an extra track OSB.

The KOFINA ventilation units:

• they are the new generation in home ventilation.

These innovative ventilation systems are our competitive core, because with integrated heat recovery they not only renew the ventilation of the house but also do heat recovery.

With the special humidity sensors that the ventilation system has:

• they take the excess moisture from the interior spaces to the environment outside the house.

Also at a programmed time (via a timer) the ventilation is changed, bringing in fresh filtered air from the outside environment.

A 2-system system is installed in the bathrooms.

• Moisture and movement. The system detects if there is excess moisture and expels it from inside the house and also monitors if the atmosphere is filtered and clean during use.

The masonry of the company KOFINAS it has been tested in its seismic bank NTUA, in a three-story natural scale essay, which was strained in its seismic vibration 1G, which corresponds to 9+ on the Richter scale.

Not only did the essay not fall, it didn't even crack.

KOFINAS SA is the only company that stood out in Greece and Europe because with this experiment its manufacturing technology brought the MAXIMUM in endurance after these strong strains.

This is what we achieved:

1. through its manufacturing technology masonry KOFINAS

2. her high grade of the materials used.

Respecting its customers as well as the environment, the company wanted to look for ways to develop the way it works, and it achieved this once again thanks to its new factory of European specifications.

Is unique company in Greece in the field of construction which has been certified according to:

• FSC (Certification of participation in the cycle of sustainable management of forests.)   

• ISO:14001(Certification for zero pollution footprint on the environment)

• ISO:45001(Certification for the safety and health of the company's personnel)

Now using FSC wood in its new modern production factory, the manufacturing is carried out with a tenth of a millimeter precision through modern CNC machines, thus avoiding human error.